2012 Mason-Dixon 20-20 Rally Report

If you already know what a Motorcycle Endurance Rally is.  Maybe because you read my report from last year (2011) or (2010) or (2009) you can skip this section and go straight to the Ride report.   Otherwise, the basics are explained in the (2010) report.

This years rally them was the Mountain Doo Doo

20-20_Mountain Do Do Patch_C1_FR1101 Ab

Mason Dixon 20-20 2012

This was hinted at last year and advertised as the antithesis of last years nearly 100% highway riding rally.   It was destined to be in the mountains and only in the mountains.

I was excited, I’d rather ride 1500 miles in the mountains than 800 on the super slab but that’s just me.

We anticipated that being in the mountains at night was gonna suck so last year after the MD2020 I added AUX lights to the bike.  Nothing really sucks worse than two lane West Virginia roads in the dark and you can’t really understand just how dark unless you’ve been there.

OK so with much anticipation, the list of boni (which is plural for bonus) was released last Sunday (one week before the rally).

We get to prepare (read agonize over these for a week) while we try to figure out a good route.

The base boni looked something like this:

2012_MD2020Boni

Now the first thing you might think is that’s a lot of boni, of which a good portion aint in the mountains.  That’s exactly what I thought.   Then the rules indicated that this was an efficiency rally.   Which means the most points per miles wins, and not the most points.   As you can see, the purple (highest value) boni are in the mountains as are most of the red (next highest in value).   But all those green ones, the mediums, they are much closer to the rally HQ, which meant (to me) that an efficient ride was going to include a bunch of those and none of the red/purple which were “in the mountains”.

This didn’t sit well with me.

For one, the MD2020 always awards the most efficient rider with the Jim Young Trophy.  This guy while efficient, usually is outside of the top 5, sometimes even outside the top 10.

So immediately I dismissed the whole efficiency idea.   I played with a few routes but I (we) which includes my riding partner decided, we wanted a mountain rally and would ride the mountains and pick the best route out of those that we could find and ride it.   We just wanted to ride well and score well.   We became much less concerned about finishing well.

And so planning began and this is what we came up with:

2012_MD2020_Route

The route included 1266 miles which would be enough to claim the points for exceeding 1250.   It was tight.   In fact it had us getting back at 2:40pm, which was 10 minutes after the Time-Bar time.  Which meant we had to find 10 minutes, something we haven’t been able to do in the past.

But the route was such that at the end the last 8 or so stops, we could bail and jet over to 81 and make a run for it if we were running behind or “on time”.

The Route sheet from which we’d work from looked like this:

TheRoute

I can’t remember the last MD2020 that got started on time but we left the barn at 05:30, and beet feet north to Jim’s grave, a mandatory bonus every year, we arrived 07:02 which meant we were 30 minutes ahead of schedule from getting started 30 minutes early.  This was awesome, now we just needed to maintain that over the next 33 hours.

Stop 2 was actually a bonus that’s not listed on the route but we were following a rider towards Jim’s grave and when he bailed off at the exit I checked to see what he might be going after, and (since we were ahead) we had time to grab it.  It was right by the exit and we would need fuel at this time as well.

So we grabbed the 35 extra points for bagging the community center:

From this spot it was a bit of a ride to get to bonus 114 The population center sign.

At this point we were almost an hour ahead of schedule and starting to think maybe we’ve missed something…

4th stop would be Lost River Church Historical Marker

Followed by the Coots Store sign:

I should point out that the bandana was a new requirement for this rally.  Not only did you have to have your rally flag but about 1/2 the boni required your ‘colorful’ bandana also had to be in the photo.   Thanks Rick!

From the Coots sign we headed to cemetery in Franklin WV.  By now it was north of 90 degrees and steamy hot.

After this bonus I noticed that my windshield wouldn’t go up or down and my turn signals were ‘funky’.

I pulled off the road at a gas station and Kyle mentioned I didn’t have any head lights to go with my other issues.  *CRAP*.   I have a 2006 FJR (Gen II) and no I have not had the wiring harness recall performed.

I have had 2 Brodie harnesses in my hands but gave them both up to guys who needed them for the Iron Butt Rally in 2009 and 2011 and never installed it.

I was fearful that my harness was melting and I’d be stranded in the middle of nowhere-WV.

In top of that starting was also problematic.  It wouldn’t start in neutral, only in gear after ‘cycling’ the kickstand.  I feared we were hosed at this point, and we were a full 1 hour ahead by now.

Kyle and I discussed and decided to carry on.  If I was going to get ‘stuck’ in WV I guess it didn’t really matter where. (We’ll revisit that thought later).

The way the spider problem often works is you shut your bike off and it just won’t start back up.  So I got it started and I’d just leave it running until the rest bonus.  We knew then we’d be in a more major metropolitan area.

The next stop was in Seneca Rocks:

Then Rich mountain.

Followed by Pickens WV the highest point bonus of the rally at 777 points.

Now here’s the deal with this.  Pickens is paved.  But there are 3 ways into Pickens, and Garmin didn’t route us in or out on a paved road.  No rather it was 20+ miles in and 20+ miles out on gravel, gravel that the FJR had no business being on.   We were passed by dirt bikes, trucks and 4-wheelers.

It was a great fire road, and lucky for us it was graded recently.  It wasn’t too rutted, buy still, we had no business there on 650lb street bikes.

Yea, there was a reason it was 777 points.

(Rick you suck)

From Pickens we headed to Hacker Valley.

Then on to the Walter Cool Historical Marker.

then an over look:

Of course you had to read the damn thing, cause they wanted the bend in the river and not the sign.

Then off to Zela

Extra special thanks to Bill Dunlop who was just leaving and pointed us to the sign, which was covered up…

From Zela to the Glen Ferris Inn near Gauley, WV

Then the Coal Marker

Then the Hatfield Cemetery

It’s starting to get dark and I don’t have any headlights.  Sad smile

I do have aux lights which will help but people don’t really like those even though they are aimed away from oncoming traffic.

Next stop is Gilbert, WV to shoot Marilyn

Then Grundy, WV

Brilliant, Kyles headlight is out too.  IT’s been fickle all day, he can usually get it started by wrapping on the relay with a screw driver…

This sucks…


(yes the FJR is running)

2 more stops before our rest bonus.

 

We found a reasonable gas station with good lighting, and an ATM.

We grabbed our rest start bonus at 00:16 and I tore into the FJR.  I was hopeful that maybe just maybe the wiring for my aux lights was causing my issue.  I disconnected the high beam relay (leaving the manual on feed) but that didn’t make a difference.   That cost me about 40 mins rest.

We slept in the nearby Burger King parking lot away from the hustle and bustle of the gas station.   The provided us with 2 good hours of sleep on our luxury thermo-rests.

The alarm went off at 02:50 and we saddled up and rode over to the gas station.   I got a crappy cup of coffee and some pop-tarts.

We got our ending receipts at 03:18 and off we went into the night.

Smithfield WV.

Then Burkes Garden to snap the old post office.  The road in and out of Burkes Garden was awesome.  Only wish it hadn’t been in the middle of the night.

This was a daylight only bonus and daylight started at 05:30 regardless of the amount of light available, which was pretty much no light.

Then Peterstown, WV for a big Chicken

Then the Deer Restaurant

Then the Cow at the Paint Bank General store.

Which was perfect cause both of us were running on fumes and probably couldn’t have made it another 5 miles to the next gas station.

At this point we realize that getting back by 1pm is a possibility.  The Garman is telling us we have a 10 minute cushion.  (which is an hour and a half better than our planned arrival time of 02:38).

Just 3 more stops.

The hump back bridge

Then the lookout at Longdale Furnace.   Another Rick Miller special.  10 miles of Gravel up the mountain in, and 10 miles out.

Just to get a picture of a pile of rocks.

Oh look, a Magical Coyote.

It’s right there under the bush, can you see it?

Lastly a quick photo of Foam Henge 🙂 I have always wanted to stop here.

We still had 180 miles to go and one fuel stop.

And we made it pulling in at 12:50pm

Total Rally miles 1264 (corrected)

Plus 450 miles to the rally and 450 miles home meant a wonderful 2164 for the weekend.

Good riding, good times.

We ended up with an 8.5 something points per mile.  Good enough for 13th/14th place.  But we didn’t really go for high points per mile so we’re really happy with that.

This was for us, the best rally we’ve ridden.  We planned then rode our plan.  We made time instead of losing it.   Outside of some potential mechanical problems that didn’t really hurt us, we didn’t have any issues.   We rode for a solid 30 hours and couldn’t have done any better.

We are happy with the ride and the results and are looking forward to next year.

The entire photo library is visible here:

https://picasaweb.google.com/105269375688822016029/2012_MD2020#

I don’t have a spot tracker and used Google Latitude on my iPhone so family and friends could track me.  That data is available here:

http://www.dishers.com/FJR/2012_MD2020_Latitude_RallyData.kml

Best viewed in google earth, it’s not super accurate though.  Apparently the Garmin can’t keep 3 days worth of Rally data so I lost all tracks prior to the rest bonus :/

Clarification: I wasn’t disappointed with the MD2020, it’s theme or the they way it was run.  Bummed that it wasn’t a pure mountain rally, and bummed that it wasn’t traditional rally scoring yes, but I wouldn’t say I was disappointed.  The rally was awesome, and well run as the MD2020 always is.  It just turned out to be a different rally than we expected so in that aspect I guess you could say we were disappointed.   Anyway, we made the best of it.  We planned a rally route that we wanted to ride and executed it to the best of our abilities.   It was probably my best ride to-date, in that we were able to execute our plan, added points and finished earlier than we expected.   We were never rushed, it was a beautiful thing.   Had this been a ‘regular’ rally we would have finished well, but we knew we wouldn’t from the get-go so we’re good with it.  

Saturday Steel May 12th. (Open Gun Update)

First and foremost Maria shot her first match.

She shot the Ruger 22/45 in the Rimfire category and beat some folks!  (9 folks to be exact!)

She’d only shot it previously at our range just a couple of times.

We’re proud of her.

 

I also shot my new ‘Precious’ G17 Open Gun in Unlimited.   It was it’s first outing.  I was a bit tentative.  The only rounds through it previously were the 80 or so I ran through it to get a load that would cycle it.

I wasn’t that far off the pace set by Jeff so I was pleased.

I followed that up with a DNF at the GSSF meet in Dayton.   (Don’t be like me, case check your ammo people).   I had a bad round that jammed up the gun good, real good.  Had I properly case checked them all I could have avoided that. I didn’t have the tools to unjam it at the match so I had to take a DNF.

Lesson learned.

Glock Race Gun-Phase (3) Better News.

Alright after the mighty FAIL that was mounting that regular C-More Slide ride to the top of  My G17 with that ‘The Accessories’ Mount.  (Which is for sale by the way).

I switched gears, did some horse trading, and got the rest of my package and now we have this:

Glock_RaceGun_Phase_031

Improvements include:

  • LoneWolf Stainless Steel Match Barrel, locks up good-n-tight, threaded. (nabbed of ebay since LoneWolf was out of stock, good thing cause I saved a few bones).
  • LoneWolf Compensator
  • C-more STS 7MOA red dot.   I like it, but I also like my dots to look like dots and not ‘fish’.   I’m a little disappointed in the shape of this dot.  My TruGlo Red-Dot on the Ruger has a better defined Dot.
  • A Lonewolf (new design) Skeletonized Steel Striker and 4lb spring to further sharpen the trigger.Striker

So I swapped out the components, installed the barrel and comp, installed the sight, got all giddy, grabbed some ammo and headed to the range.

Bummer, the gun wouldn’t cycle.   I was skeptical when I bought the compensator because of the note on the product: “We highly recommend the use of LWD stainless guide rod and ISMI reduced power recoil springs with this product. Light loads or reduced power ammunition may not run reliably.

Well pfft, I already have an 11lb ISMI spring, on a captured stainless guide rod. I looked and ISMI doesn’t seem to make a 10 but I’ve inquired.  I know my loads are a little light but they aren’t super-light.

So back to the house, crank out 20 or so loads more loads with .5 more grains and grab a box of factory ammo.  Back to the range.  (Sure is nice that the range is in my back yard).

Some success but still not enough success, not even the factory Federal Red-box ran to my satisfaction.   So I called up Jeff, and talked it over with him.

I verified that I am running an 11lb spring.  Cranked out another 25 rounds with nearly a grain more than my standard round that cycled the gun perfectly before. Back to the range to test.

I giggled inside.   This thing is awesome.  

Now next up is the slide lightening.  Actually it involves getting a new LoneWolf Slide, one that hopefully is cut to using their Skeleton pattern.

Though I’m trying to get a feel for just how much weight savings that is.  Hopefully the lonewolf guy can answer that.  I’d surely hate to spend the coin and end up with insignificant savings.  I am also considering just strategically swish cheezing my factory slide.  Holes, lots of holes.

G17 SuperSlide

Glock_RaceGun_Phase_035

There is still work to be done, but for now I should have ‘enough’ open gun to start making a couple guys sweat.   We’ll find out Saturday.  I wish I had more time to test, hope I don’t lay a big egg. Smile

Glock Race Gun-Phase (2) Bad news.

Ugh, this is unfortunate.

I shot the Ghetto bottom feeder Glock ‘open gun’ friday night.   Other than some dry fire practice it hadn’t been shot previously.  At this time the only thing that makes it open is the cmore.  Parts (Barrel, Compensator and other go fast parts) have been ordered but they have yet to arrive.

Stage 1, and Stage 2 went pretty well.   I was happy.   Then it happened on stage 3, a malfunction.   Tap-Rack and go.  I noticed I got a live round and an empty case. Hrm…

Then Saturday while shooting a bit at the range with a buddy I brought it out to show him.   He shot it and was kind of excited.  I shot it a couple time and again had a couple of issues.

Then Molly showed up and she wanted to shoot it so I sat back and watched.

Glock_RaceGun_Phase_031

Sadly she too had a couple malfunctions and it was clear, the cartridge were being ejected straight into the Cmore, even though it was offset quite a bit.

About 1 in 20 times it would bounce straight back down into the chamber area and jam things up.   I wasn’t happy with this mount to begin with but am not excited about a mount that requires me to alter the frame.   So if you have a good source for a mount that allows me to use this Cmore rotated 90 degrees and doesn’t require me to modify the frame let me know.

Otherwise the plan now is to go slide mount with a smaller optic.

More as this unfolds.

Glock Race Gun–Phase (1)

OK, We just got back from the PSA Shootout and had an absolute blast. 

Unlike the local gigs around here where I’m able to shoot both my G19 and G34 in ‘stock auto’, cause, well they are basically stock (except for some trigger work).. In Palmyra I could only shoot one gun in each class.  

I elected to shoot the G19 in stock auto, and the (stock) G34 in Open Auto.   At every stage I’d whip that thing out and the RO would say “Hey wait, we have you down for Open Auto”.   And I’d tell them, no, that’s right, but I don’t have an open gun.

Anyway fast forward to the results.   I shot extremely poorly the first day with the G19.   Nothing wrong with the gun, I just laid an egg.   I was nervous, and had some mental break downs as well as fundamental break downs.

Friday I shot the G34 ‘respectable’  Not great but considering the previous days events, oh so much better.   Enough that I would have scored well in stock auto with that gun.   There is mucho room for improvement across the board.   But I can easily see, with some adjustments getting a Glock Race Gun in the top 25 in Open.

That’s right a ‘bottom feeder’ Glock Race gun.

I know what you’re thinking, this has been done, you should just go buy an STI or something.

Well I’d love to do that too, but I don’t have the funds.   I think I can build what I want out of parts I already have, with a few additions, and some bartering for under $400.     That’s the goal, heck I can probably do it for less than that even.  So here goes.

I’m starting with my G17, which was a GSSF won handgun so my cost there is literally the $25 FFL fee that I paid to get it to me.

Trigger work has already been done to my satisfaction. It comes in at around 2.8lbs. Let’s call that $40 in parts, plus a lot of polishing. That includes the connector, the trigger stop and some springs, some of which I already had.

I already had a C-More 6MOA red dot that I picked up last year, I just needed a mount.   $40 later via ebay and I have a nice external/frame mount.

This probably won’t be the be-all-end-all.   I think I really want a slide mounted small optic, but that would immediately blow the budget.   But I’m shopping on ebay and have some targets in mind.

With just those items we have a good start:

Glock_RaceGun_Phase_02

Yeah the mount, I don’t like it, but it’s a start.  I’m going to shoot this a few times and make some decisions.

Next up will be a barrel/comp combination.  Again, ebay and online auctions will be my source if possible.

Then slide lightening/milling.   I’m hopeful that will be low cost through one of my machinist friends.

I already have a plethora of Magazines (haha, thanks Jeff) which helps keep the costs down.   If I picked up another race gun I’d be faced with buying another bunch of mags for that one gun.  

I’ll post up more as this develops.  It could be a HUGE mistake, but then even if it is, it won’t cost me much to find that out as I’ll be able to re-use most of the parts.

More as this develops.